OSI Model Concepts

OSI Model Concepts:

The standard model for networking protocols and distributed applications is the International Standard Organization's Open System Interconnect (ISO/OSI) model. It defines seven network layers. 

Short for Open System Interconnection, an ISO standard for worldwide communications that defines a networking framework for implementing protocols in seven layers. Control is passed from one layer to the next, starting at the application layer in one station, proceeding to the bottom layer, over the channel to the next station and back up the hierarchy. 

At one time, most vendors agreed to support OSI in one form or another, but OSI was too loosely defined and proprietary standards were too entrenched. Except for the OSI-compliant X.400 and X.500 e-mail and directory standards, which are widely used, what was once thought to become the universal communications standard now serves as the teaching model for all other protocols.

Control is passed from one layer to the next, starting at the application layer in one station, proceeding to the bottom layer, over the channel to the next station and back up the hierarchy.

Understanding how the OSI Model works is not only useful for taking certification exams, but also for real life scenarios. Read How to use the OSI Model to Troubleshoot Networks for more info.

Layer 1 - Physical

Physical layer defines the cable or physical medium itself, e.g., thinnet, thicknet, unshielded twisted pairs (UTP). All media are functionally equivalent. The main difference is in convenience and cost of installation and maintenance. Converters from one media to another operate at this level. 

Layer 2 - Data Link

Data Link layer defines the format of data on the network. A network data frame, aka packet, includes checksum, source and destination address, and data. The largest packet that can be sent through a data link layer defines the Maximum Transmission Unit (MTU). The data link layer handles the physical and logical connections to the packet's destination, using a network interface. A host connected to an Ethernet would have an Ethernet interface to handle connections to the outside world, and a loopback interface to send packets to itself.

Ethernet addresses a host using a unique, 48-bit address called its Ethernet address or Media Access Control (MAC) address. MAC addresses are usually represented as six colon-separated pairs of hex digits, e.g., 8:0:20:11:ac:85. This number is unique and is associated with a particular Ethernet device. Hosts with multiple network interfaces should use the same MAC address on each. The data link layer's protocol-specific header specifies the MAC address of the packet's source and destination. When a packet is sent to all hosts (broadcast), a special MAC address (ff:ff:ff:ff:ff:ff) is used. 

Layer 3 - Network

NFS uses Internetwork Protocol (IP) as its network layer interface. IP is responsible for routing, directing datagrams from one network to another. The network layer may have to break large datagrams, larger than MTU, into smaller packets and host receiving the packet will have to reassemble the fragmented datagram. The Internetwork Protocol identifies each host with a 32-bit IP address. IP addresses are written as four dot-separated decimal numbers between 0 and 255, e.g., 129.79.16.40. The leading 1-3 bytes of the IP identify the network and the remaining bytes identifies the host on that network. The network portion of the IP is assigned by InterNIC Registration Services, under the contract to the National Science Foundation, and the host portion of the IP is assigned by the local network administrators. For large sites, the first two bytes represents the network portion of the IP, and the third and fourth bytes identify the subnet and host respectively.

Even though IP packets are addressed using IP addresses, hardware addresses must be used to actually transport data from one host to another. The Address Resolution Protocol (ARP) is used to map the IP address to it hardware address. 

Layer 4 - Transport

Transport layer subdivides user-buffer into network-buffer sized datagrams and enforces desired transmission control. Two transport protocols, Transmission Control Protocol (TCP) and User Datagram Protocol (UDP), sits at the transport layer. Reliability and speed are the primary difference between these two protocols. TCP establishes connections between two hosts on the network through 'sockets' which are determined by the IP address and port number. TCP keeps track of the packet delivery order and the packets that must be resent. Maintaining this information for each connection makes TCP a stateful protocol. UDP on the other hand provides a low overhead transmission service, but with less error checking. NFS is built on top of UDP because of its speed and statelessness. Statelessness simplifies the crash recovery. 

Layer 5 - Session

The session protocol defines the format of the data sent over the connections. The NFS uses the Remote Procedure Call (RPC) for its session protocol. RPC may be built on either TCP or UDP. Login sessions uses TCP whereas NFS and broadcast use UDP. 

Layer 6 - Presentation

External Data Representation (XDR) sits at the presentation level. It converts local representation of data to its canonical form and vice versa. The canonical uses a standard byte ordering and structure packing convention, independent of the host. 

Layer 7 - Application

Provides network services to the end-users. Mail, ftp, telnet, DNS, NIS, NFS are examples of network applications. 

OSI Model Reference Table

Layer	Function	Protocols	Network Components
Application User Interface	Used for applications specifically written to run over the network Allows access to network services that support applications; Directly represents the services that directly support user applications Handles network access, flow control and error recovery Example apps are file transfer,e-mail, NetBIOS-based  applications	DNS; FTP; TFTP; BOOTP; SNMP;RLOGIN; SMTP; MIME; NFS; FINGER; TELNET; NCP; APPC; AFP; SMB	Gateway
Presentation Translation	Translates from application to network format and vice-versa All different formats from all sources are made into a common uniform format that the rest of the OSI model can understand Responsible for protocol conversion, character conversion,data encryption / decryption, expanding graphics commands, data compression Sets standards for different systems to provide seamless communication from multiple protocol stacks Not always implemented in a network protocol		Gateway Redirector
Session Syncs and Sessions	Establishes, maintains and ends sessions across the network Responsible for name recognition (identification) so only the designated parties can participate in the session Provides synchronization services by planning check points in the data stream => if session fails, only data after the most recent checkpoint need be transmitted Manages who can transmit data at a certain time and for how long Examples are interactive login and file transfer connections, the session would connect and re-connect if there was an interruption; recognize names in sessions and register names in history	NetBIOS Names Pipes Mail Slots RPC	Gateway
Transport Packets; Flow control & Error-handling	Additional connection below the session layer Manages the flow control of data between parties across the network Divides streams of data into chunks or packets; the transport layer of the receiving computer reassembles the message from packets A train is a good analogy => the data is divided into identical units Provides error-checking to guarantee error-free data delivery, with on losses or duplications Provides acknowledgment of successful transmissions; requests retransmission if some packets don’t arrive error-free Provides flow control and error-handling	TCP, ARP, RARP; SPX NWLink NetBIOS / NetBEUI ATP	Gateway Advanced Cable Tester Brouter
Network Addressing; Routing	Translates logical network address and names to their physical address (e.g. computername ==> MAC address) Responsible for addressing determining routes for sending managing network problems such as packet switching, data congestion and routing If router can’t send data frame as large as the source computer sends, the network layer compensates by breaking the data into smaller units. At the receiving end, the network layer reassembles the data Think of this layer stamping the addresses on each train car	IP; ARP; RARP, ICMP; RIP; OSFP; IGMP; IPX NWLink NetBEUI OSI DDP DECnet	Brouter Router Frame Relay Device ATM Switch Advanced Cable Tester
Data Link Data frames to bits	Turns packets into raw bits 100101 and at the receiving end turns bits into packets. Handles data frames between the Network and Physical layers The receiving end packages raw data from the Physical layer into data frames for delivery to the Network layer Responsible for error-free transfer of frames to other computer via the Physical Layer This layer defines the methods used to transmit and receive data on the network. It consists of the wiring, the devices use to connect the NIC to the wiring, the signaling involved to transmit / receive data and the ability to detect signaling errors on the network media	Logical Link Control error correction and flow control manages link control and defines SAPs 802.1 OSI Model 802.2 Logical Link Control	Bridge Switch ISDN Router Intelligent Hub NIC Advanced Cable Tester
		Media Access Control communicates with the adapter card controls the type of media being used: 802.3 CSMA/CD (Ethernet) 802.4 Token Bus (ARCnet) 802.5 Token Ring 802.12 Demand Priority
Physical Hardware; Raw bit stream	Transmits raw bit stream over physical cable Defines cables, cards, and physical aspects Defines NIC attachments to hardware, how cable is attached to NIC Defines techniques to transfer bit stream to cable	IEEE 802 IEEE 802.2 ISO 2110 ISDN	Repeater Multiplexer Hubs Passive Active TDR Oscilloscope Amplifi

TCP / IP Reference Page

Protocols according to layers:
 

Data Link Layer
Network Layer
Transport Layer
Session Layer
Application Layer
Routing
Tunneling
Security.

The Defense Advance Research Projects Agency (DARPA) originally developed Transmission Control Protocol/Internet Protocol (TCP/IP) to interconnect various defense department computer networks. The Internet, an international Wide Area Network, uses TCP/IP to connect government and educational institutions across the world. TCP/IP is also in widespread use on commercial and private networks. The TCP/IP suite includes the following protocols.

Data Link Layer
ARP/RARP	Address Resolution Protocol/Reverse Address
DCAP	Data Link Switching Client Access Protocol
Network Layer
DHCP	Dynamic Host Configuration Protocol
DVMRP	Distance Vector Multicast Routing Protocol
ICMP/ICMPv6	Internet Control Message Protocol
IGMP	Internet Group Management Protocol
IP	Internet Protocol version 4
IPv6	Internet Protocol version 6
MARS	Multicast Address Resolution Server
PIM	Protocol Independent Multicast-Sparse Mode (PIM-SM)
RIP2	Routing Information Protocol
RIPng for IPv6	Routing Information Protocol for IPv6
RSVP	Resource ReSerVation setup Protocol
VRRP	Virtual Router Redundancy Protocol
Transport Layer
ISTP
Mobile IP	Mobile IP Protocol
RUDP	Reliable UDP
TALI	Transport Adapter Layer Interface
TCP	Transmission Control Protocol
UDP	User Datagram Protocol
Van Jacobson	compressed TCP
XOT	X.25 over TCP
Session Layer
BGMP	Border Gateway Multicast Protocol
Diameter
DIS	Distributed Interactive Simulation
DNS	Domain Name Service
ISAKMP/IKE	Internet Security Association and Key Management Protocol and Internet Key Exchange Protocol
iSCSI	Small Computer Systems Interface
LDAP	Lightweight Directory Access Protocol
MZAP	Multicast-Scope Zone Announcement Protocol
NetBIOS/IP	NetBIOS/IP for TCP/IP Environment
Application Layer
COPS	Common Open Policy Service
FANP	Flow Attribute Notification Protocol
Finger	User Information Protocol
FTP	File Transfer Protocol
HTTP	Hypertext Transfer Protocol
IMAP4	Internet Message Access Protocol rev 4
IM PPpre IMPPmes	Instant Messaging and Presence Protocols
IPDC	IP Device Control
IRC	·Internet Relay Chat Protocol
ISAKMP	Internet Message Access Protocol version 4rev1
ISP
NTP	Network Time Protocol
POP3	Post Office Protocol version 3
Radius	Remote Authentication Dial In User Service
RLOGIN	Remote Login
RTSP	Real-time Streaming Protocol
SCTP	Stream Control Transmision Protocol
S-HTTP	Secure Hypertext Transfer Protocol
SLP	Service Location Protocol
SMTP	Simple Mail Transfer Protocol
SNMP	Simple Network Management Protocol
SOCKS	Socket Secure (Server)
TACACS+	Terminal Access Controller Access Control System
TELNET	TCP/IP Terminal Emulation Protocol
TFTP	Trivial File Transfer Protocol
WCCP	Web Cache Coordination Protocol
X-Window	X Window
Routing
BGP-4	Border Gateway Protocol
EGP	Exterior Gateway Protocol
EIGRP	Enhanced Interior Gateway Routing Protocol
HSRP	Cisco Hot Standby Router Protocol
IGRP	Interior Gateway Routing
NARP	NBMA Address Resolution Protocol
NHRP	Next Hop Resolution Protocol
OSPF	Open Shortest Path First
TRIP	Telephony Routing over IP
Tunneling
ATMP	Ascend Tunnel Management Protocol
L2F	The Layer 2 Forwarding Protocol
L2TP	Layer 2 Tunneling Protocol
PPTP	Point to Point Tunneling Protocol
Security
AH	Authentication Header
ESP	Encapsulating Security Payload
TLS	Transport Layer Security Protocol